收藏本站
EVAL-ADM106x
fails to occur. The user can set a time limit on how long it
can take for the End-of Step to occur. If the event does not
happen, then the user can take the decision to take some
remedial action (e.g.) if a supply fails to come into
tolerance after 100ms, it is likely that there is a fault on
that supply and the user may wish to shut all supplies
down.
Preliminary Technical Data
should remain low (0).
3.
Monitor - While the End- of Step function focuses on a
single event, the Monitor function provides the ability to
ensure that any/all previous events are still valid (e.g.) if
the ADM106x is about to turn on supply number 6, it can
check that supplies 1-5 are still in tolerance. It does this
by simply OR’ing the status of selected blocks together. If
any one of these events fails then the Monitor function will
exit to a state that takes remedial action (e.g.) to shut off
all of the supplies.
Click to enable
Sequence
Use the drop down boxes to configure the Sequence for the
selected state. The configuration is automatically displayed in the
‘Sequence Engine Program’ above.
The ADM106x software Sequencing Engine window provides the
facility to edit each state individually, then report the configuration
Figure 47 Entering a Sequence
of all of the states together, so that the user can easily read the flow
of events that need to occur. The Sequencing Engine window is
shown in figure 46 :-
PROGRAMMING THE SEQUENCE FUNCTION
To enable the Sequence function, click the Sequence> button.
Programming the Sequence function is formatted into an “IF
event occurs, then GOTO State X after Yms” statement. The
drop-downs force the user to configure the Sequence in a valid
format. The first drop-down box lists the events that could
progress the sequence. They are:-
1. The inputs
A valid condition on these (e.g.) a supply in tolerance,
a digital input asserted- could dictate the sequence.
2. Warning
Figure 46. ADM106x Sequencing Engine programming window
Warning is a signal from a wide OR gate which can
be used to dictate the sequence. The inputs to this OR
gate are:-
PROGRAMMING THE PDO’S
The State editor allows the user to program each state individually.
The program flow from top to bottom of the state editor is:-
i.
The output from the secondary detectors on
VP1-4 and VH
1.
2.
3.
4.
PDO’s
Sequence (or End of Step)
Timeout
Monitor
ii.
iii.
The status of the ADC channels on the
inputs (i.e.) whether the value read exceeds
the value set in the limit register (see section
on Read-back)
The status of the ADC channel on the
internal temp sensor and D1P/D1N
(ADM1062/3) and D2P/D2N (ADM1063
When programming a state, the user should consider what events
need to happen in the order suggested by the software. The first
only)
thing to consider when entering a state is what should the outputs of
iv.
The status of the ADC channels on AUX1
the ADM106x be doing. For instance, in the first state, the user may
want to wait for the ADM106x to detect that a digital input has been
asserted before anything is enabled, in which case, all of the PDO’s
3. SMBus Jump
and AUX2 (ADM1066 only).
Rev. PrB | Page 26 of 38
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EVAL-ADM1075CEBZ BOARD EVAL FOR ADM1075
EVAL-ADM1087EBZ BOARD EVALUATION FOR ADM1087
EVAL-ADM1166TQEBZ BOARD EVAL FOR ADM1166TQ
EVAL-ADM1168LQEBZ BOARD EVAL FOR ADM1168LQ
EVAL-ADM1170EBZ BOARD EVALUATION FOR ADM1170
EVAL-ADM1171EBZ BOARD EVALUATION FOR ADM1171
EVAL-ADM1172EBZ BOARD EVALUATION FOR ADM1172
EVAL-ADM1175EBZ BOARD EVALUATION FOR ADM1175
相关代理商/技术参数
EVAL-ADM1063LFEB 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1063LFEBZ 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1063TQEB 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1063TQEBZ 功能描述:BOARD EVALUATION FOR ADM1063TQ RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081
EVAL-ADM1064LFEB 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1064LFEBZ 制造商:Analog Devices 功能描述:EVAL KIT FOR ADM1064 - Bulk
EVAL-ADM1064TQEB 功能描述:BOARD EVALUATION FOR ADM1064TQ RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081
EVAL-ADM1064TQEBZ 制造商:Analog Devices 功能描述:EVAL BOARD - Bulk